User Manual

How to connect and configure a Surround Speaker Setup
When using Symphony with a surround speaker setup, the first set of outputs can be configured as speaker outputs
suitable for connection to a 5.1, 6.1, or 7.1 speaker system depending on which I/O module is installed in slot 1. With
this configuration, turning the control knob will adjust all applicable line-outputs simultaneously.
1.
Connect your speakers to Symphony’s outputs 1 - 6
A standard 5.1 surround setup is routed as follows:
•
Output 1: Front Left
•
Output 2: Front Right
•
Output 3: Center
•
Output 4: Sub-woofer
•
Output 5: Left Surround
•
Output 6: Right Surround
2.
Open Maestro and click the “Output” tab
(or use the keyboard combination [⌘+2])."
"
!
3.
In the Speaker Output section, click the Speaker
Output drop-down box and select “5.1”"
"
!
Note:
-
When an 8x8 I/O module is in the bottom Module 1 slot, an additional option for 7.1 becomes available.
-
When a 16x16 I/O module is in the bottom Module 1 slot, additional options for 7.1 and 9.1 become available.
SYMPHONY I/O MK II - USER’S GUIDE Page 25