User Manual

Monitor Control Center

Symphony I/O Mk II is equipped with several monitoring features to provide for your monitoring needs.

How to set the Monitor Outputs as a ﬁxed Line-Out

This setting changes the Monitor Outputs from a variable volume controlled by the control knob to a fixed output at the

full +4dBu or -10dBV reference level. This setting is convenient for connecting Symphony to an external monitor

control device such as a mixer or control center.

Open Maestro and click the

“Output” tab

(or use the keyboard

combination [⌘+2]).

In the Speaker Output section click the Speaker Output drop-

down box and select “Line”.

Note: This disable’s Symphony’s Monitor Output level control.

How to Setup and Use Multiple Speaker Sets

It is possible to connect up to three pairs of speaker monitors and toggle between them. This is very useful to check

how a mix sounds through different speakers and systems.

Connect the first pair of speakers to analog outputs 1-2, the second pair to outputs 3-4, and if desired, a third pair

to outputs 5-6.

Open Maestro and click the

Output tab (or use the

keyboard combination [⌘

+2]).

From the Speaker Output

Select drop-down box,

select “2 Speaker Sets” or

“3 Speaker Sets”.

Click the Speaker Set 1, 2,

or 3 button to select which

speaker set is active.

Note: To activate multiple speaker sets simultaneously, hold down [command ⌘] and select another speaker set

button.

SYMPHONY I/O MK II - USER’S GUIDE Page 24