User Manual

Update Symphony Firmware
The first time Symphony is used after the software
installation, you will likely need to update the
firmware.
Warning: Do not disconnect power or interrupt the
firmware update process before it is complete as this may
damage the unit.
1.
Make sure Symphony is connected to the computer and is powered on.
2.
Open the Symphony
Firmware Updater.app which
is located in the Mac’s
Applications > Utilities folder.
3.
Select “Update” and follow any prompts that may
appear.
Symphony may reboot several times - this is normal.
4.
When the progress reaches 100% and says “Update
Complete”, you are done and can quit the updater.!
SYMPHONY I/O MK II - USER’S GUIDE Page 10