users manual

Maestro - Apogee ONE User’s Guide
Output Tab on iOS
!
1.
Analog Output Meter - This meter displays the
level of the analog output before D/A conversion, %
in the range -48 to 0 dBFS. %
2.
Output Selection - This pop-up menu selects the
output source that is sent to the speaker outputs. %
A. Select Out 1-2 to send software outputs directly
to the hardware output - when this setting is
selected, the low latency mixer is removed from
the signal path.%
B. Select Mixer to send the output of the low
latency mixer to the hardware output.!
3.
Output Level - This knob controls the speaker
output level. Touch the “-” or “+” buttons to
change the speaker output level by 1 dB.%
4.
Mute - Click this button to mute the output.%
%
%
%
%
%
22
22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20