users manual

Getting Started - Apogee ONE User’s Guide
Adjusting Input & Output Levels"
Input level
To change ONE’s input level (i.e the preamp gain of microphones and instruments):#
1.
Push the Controller Knob until the built-in
microphone, external microphone or instrument
icon is lit on ONE’s display. !
!
 !
2.
Turn the Controller Knob until the %
desired recording level is obtained. !
'!
The controller knob operates in parallel with Maestro’s
input controls.!
Note: You will not hear your input until you enable software monitoring from a recording application or engage the low
latency mixer in Apogee's Maestro control panel (see page 28 for more info).!
Output level
1.
Push the Controller Knob until the %
Speaker icon is lit on ONE’s display.!
!
 #
2.
Turn the controller knob to %
the desired listening level.!
The controller knob
operates in parallel with
any software output
controls.!
11