User Manual-for windows
Apogee Duet | User’s Guide for Windows
Troubleshooting
Looking for answers?
Ask the www.apogeedigital.com/knowledgebase
Duet FAQs
Q: I’ve connected my guitar, but I’m not getting any input. What should I check?
A: On the Input tab of Maestro, be sure to set Analog Level to Instrument (Inst).
Q: I’m not getting any output from audio software applications. What should I check?
A: If you have chosen Mixer for the output then the Playback 1-2 fader must be raised to send audio
software outputs to Duet’s outputs.
Q: I want Maestro to open automatically each time I connect Duet. What should I set?
A: This feature is only available on OS X
Q: How do I reset Duet?
A: To reset Duet unplug the USB cable, hold down Controller knob, reconnect the USB cable and
maintain the controller knob in the down position until the unit has completely initialized. Here’s a
video demonstrating this.
Q: I am hearing a delay between what I play and what I hear in my headphones. Can I do
anything about this?
A: Using the low latency mixer found in the Apogee Maestro application may help. Click on the mixer
tab to configure it to your desired settings. Be sure to set your desired output to “mixer” on the output
page.
Page 33