User Manual-for windows
Apogee Duet | User’s Guide for Windows
Mixer Section
The mixer section provides a Direct Monitor mixer for workflows that utilize the low-latency Direct
Monitoring features of your Duet interface.
1. Mixer 1 - Signal from each channel can be sent through this mixer by raising the corresponding
Mixer 1 Channel Fader.
﹣ This mixer’s Master signal can then be selected as a source for the Headphones or Speaker
outputs, providing a low-latency direct monitoring signal path.
2. Channel Fader - Sets the level of the channel signal that goes to the Mixer Master.
3. Mixer Channel Pan Control - Steers the channel’s signal to the left or right sides of the Mixer
Master.
﹣ ctrl-click to reset the pan to center (0)
4. Channel Mute button - Cut the signal routing to the mixer stereo output. Command-click to cut
all channels
5. Channel Solo button - Mute all channels that do not have this solo button engaged in this mixer.
Page 19