User Manual

Apogee Duet User’s Guide
System Setup (Mac only)
1. Device Icon & ID Button (Mac only) - A device icon and ID button is placed adjacent
to each row of parameters to identify the hardware unit to which the row belongs.
By clicking on the ID button, the corresponding hardware unitʼs front panel will illuminate.
Each hardware unit is assigned a Peripheral Prefix which is displayed on the ID button.
2. Setting Sample Rate - This drop down selects the sample rate. Under certain
circumstances, (for example, when a DAW session is open) this setting will be
overridden by software sample rate settings.
3. Peak Hold - This pop-up menu sets the time that peak indications are held on software
and front panel meters.
4. Over Hold - This pop-up menu sets the time that over indications are held on software
and front panel meters.
5. Keyboard Volume Control - The Audio Output drop down menu sets the hardware
output that’s controlled by the Mac keyboard volume control.
Page 24