Full Product Manual

04
05
Installation Instruction Package contents
You may need these tools
Method 1: Plug in Method 2: Hardwire
Insert the plug into the socket, keep the
voltages between 110V and 120V. If the
voltage exceeds 120V, please use
transformer.
Cut the plug, connect the same color wire and tighten them (Disconnect power
before hardwire).
There are three power wires behind the mirror
(Usually white, red or blue.)
(Usually green or chartreuse.)
(Usually black or dark brown.)
Use a electric drill to punch four holes at the marked spots.
Use a screwdriver to screw the screws into the wall anchors. Apply wall anchors with hammer.
Turn on the power.Hang the mirror on the wall
Wall Anchors x4 Screws x4 Plug LED MirrorBracket x2
27.2inch
15inch
The redline locate the hook position
Power Cable 59inch
Power Box
3.8inch
1.38inch
15.35inch
10.24inch
The redline locate the hook position
Power Cable 59inch
Power Box
3.8inch
1.38inch
3.8inch
PS: The location of the button is located the power box.
SIZE 2SIZE 1
Neutral Wire
Live Wire
Ground Wire