Installation Guide

Measure the distance between the two ends,
this mirror can be hung horizontal or vertical.
Using a pencil and a level, mark the desired
position on the wall.
Drill the holes for nails and screws.
Turn on the power.
Connect the wires
properly to their
corresponding color.
Lift the mirror above
the brackets.
Insert the nails.
Mounted the brackets on the wall and then
ight the screws to ensure the bracket stay sturdy.
(Leave a 2-3 mm gap between the screwhead and wall)
1. Do not touch the mirror with wet hands, and do not wipe the mirror with wet cloth to avoid increasing moisture intrusion.
2. It is recommended to wipe the mirror with a soft cloth or gauze.
3. Do not use any chemicals or misuse cleaning agents.
White(neutral) supply wire to the white(or ribbed) mirror wire
Black (live) supply wire to the black(or smooth) mirror wire
Green or bare copper supply wire to the green or bare copper mirror wire.
Power Method 2 : Hardwire
Power Method 1: Plug in
02
Maintenance
Turn off the power before installation.
Manufacturer: Zhongshan Chengjiang Glass Technology Co.,Ltd.
Address: Jichang Village, Dongfeng Town, Zhongshan City, Guangdong Province, China
Service Email: [e-mail]
Installation
4