Specifications

14
7. Sending a Location Update
The Personal Tracker comes with an INFO button that allows you to
send your current GPS position to the Control Base and all contact
persons.
Press the INFO button to send a
request with your current position to
the Control Base.

The device will collect GPS data (ca. 30-60 sec) and send a message
and GPS coordinates to the Control Base. The Control Base
software will find the street name and closest intersection from a
map server and send these details through SMS short messages to
all Contact numbers, with the text (example):
Power On/ Off
The INFO button is also used to power the device on or off.
To power off the device, press the INFO button and hold for 3 seconds.
Press again to turn the device on.
INFO button to
send location
details
Robert is in Madison Ave,
near intersection Brixton
Rd.; Request !
15
8. Alarm Reporting Features
You can use your Personal Tracker as an alarm reporting device.
With the built-in Geo-fence function you can create a 200 meter
Parking Geo-fence around the device. If the device leaves the area, an
alarm report will be triggered. In addition, you can activate or disable
the G-Force alarm features.
Press the SET button once to set and a
200 m Geo-fence around the device.
Activation period is 30 sec.
Press the SET button a second time to
activate the G-Force alarm (Fall-down
or Impact). Activation period is 30 sec.
Press the SET button a third time to
activate both Geo-fence and G-Force
alarm.
Press the SET button a fourth time to
disable both Geo-fence and G-Force
alarm.

If a Geo-fence alarm has been triggered, the device will send an
alarm message and GPS coordinates to the Control Base. The
Control Base software will find the street name and closest
intersection from a map server and send these details through SMS
short messages to all Contact numbers, with the text (example):
In addition, you are able to setup and configure monitoring activities
and alerts for the Personal Tracker, using Tracking Web services via
Internet Explorer or mobile on GPRS enabled cell phones.
Press SET button
repeatedly to
activate or
disable Geo-
fence and G-
Force alarms.
Robert is in Madison Ave,
near intersection Brixton
Rd.; Geo-Fence Violation !