Installation Guide

Troubleshooting
IF YOU ARE HAPPY WITH THE COVERAGE, THESE LIGHT ISSUES DON'T HAVE TO
BE RESOLVED. YOUR CARRIER'S BAND HAS NOT BEEN AFFECTED.
FIXING ANY BAND INDICATOR LIGHTS BLINKING
RED ISSUES
Band Indicator Lights Blinking Red
1. Band Indicator Lights Blink 1 To 15 Times ( 1 cycle) Then Turn Green
That means the gain lowered 1~15 dB. If your coverage is good and reception
is good, you can ignore the blink; If you would like greater coverage and better
reception, please increase the distance between the outside antenna and
inside antenna to improve the gain.
2. Band Indicator Lights Blink All The Time
That means the gain lowered 16~25 dB. Please increase the distance
(horizontally or vertically) between the outside and inside antenna to solve the
oscillation problem. Check and install the whole system again.
FIXING ANY BAND INDICATOR LIGHTS SOLID RED
ISSUES
Band Indicator Lights Solid Red
That means shut down. Please increase the distance (horizontally or vertically)
between the outside and inside antenna to solve the oscillation problem. Un-
plug and re-plug in power supply. Check and install the whole system again.
17