Installation Guide

To uphold network protection standards and ensure compliance, all active cellular
devices must maintain a separation distance of at least six feet between the inside unit
antenna and outside unit antenna and at least four feet of separation distance from the
inside unit.
Use of a non-APlusBoost product or accessory may result in damage to the equipment or
components of the equipment.
The inside unit is designed for use in an indoor, temperature-controlled environment
(less than 100 degrees Fahrenheit). It is not intended for use in attics or similar
locations where temperatures may be in excess of that range.
Sprint: http://www.sprint.com/legal/fcc_boosters.html
T-Mobile/MetroPCS: https://support.t-mobile.com/docs/DOC-9827
Verizon Wireless: http://www.verizonwireless.com/wcms/consumer/register-signal-booster.html
AT&T: https://securec45.securewebsession.com/attsignalbooster.com/
U.S. Cellular: http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp
FOR MORE INFORMATION ON REGISTERING YOUR SIGNAL BOOSTER WITH
YOUR WIRELESS PROVIDER, PLEASE SEE BELOW:
RF Safety Warning: Any antenna used with this device must be located at least 8
inches from all persons.
Safety Guidelines
15
This device may be operated ONLY in a fixed location for in-building use.