User manual

APC-3x97B (SBC-7106) User Manual

Advanced Calibration

Advanced Calibration uses 4, 9, 16 or 25 points

to effectively calibrate touch panel linearity of

aged touch screens. Click this button and

touch the red squares in sequence with a

stylus. To skip, press ESC’.

Command Calibration

Command call calibration function. Use

command mode call calibration function, this

can uses Standard, 4, 9, 16 or 25 points to

calibrate E.g. Please run ms-dos prompt or

command prompt c:\Program Files\PenMount

Universa Driver\Dmcctrl.exe -calibration 0

( Standard Calibration) Dmcctrl.exe - calibration ($)

0= Standard Calibration 4=Advanced Calibration 4

9=Advanced Calibration 9 16=Advanced

Calibration 16 25=Advanced Calibration 25

Step 1. Please select a device then click “Configure”. You can also double click the device too.