User manual

APC-3X97A user manual

Chapter 3_____________________________

3.1 Operations after POST Screen

After CMOS discharge or BIOS flashing operation, the system will display the following screen for your

further operation. Press F1 key to continue or Del key to enter CMOS Setup.

Phoenix – AwardBIOS v6.00PG, An Energy Star Ally

ASB-L701 V019

Main Processor : Intel® Atom™ 1.60GHz(133x12)

Memory Testing :515008K OK + 8M shared memory

CPU Brand Name : Intel® Atom™ CPU N270 @1.60GHz

C1E BIOS Supported

Hyper-Threading Technology CPU Detected (Hyper-Threading Technology Enabled)

Memory Frequency For DDR2 533

IDE Channel 0 Master : None

IDE Channel 0 Slave : None

IDE Channel 1 Master : None

IDE Channel 1 Slave : None

CMOS checksum error – Defaults loaded

Press F1 to continue, DEL to enter SETUP

08/14/2010-Silverthrone-6A79KAPXC-00

After optimizing and exiting CMOS Setup, the POST screen displayed for the first time is as follows

and includes basic information on BIOS, CPU, memory, and storage devices.