User manual

APC-3X92X User Manual
27
1
+DC5V
2
Ground
3
Ground
4
+DC12V
Note:
Output current of the connector must not be above 1A.
27. CN1: (2.5mm Pitch 1x2 box Pin Header),an onboard 5V output connector is reserved
to provide power for IDE/SATA devices.
Pin#
Signal
Name
1
+DC5V
2
Ground
Note:
Output current of the connector must not be above 1A.
28. PC104+: (4x30 Pin), PC104 plus connector, it conforms to standard PC104+ specifi-
cation.
29. MPCIE2: (30mmx30mm Socket 52Pin),mini PCIE socket, it is located at the top, it
supports mini PCI-E devices with USB2.0, SMBUS and PCI-E signal.
30. MPCIE2 SCREW HOLES: one screw holes for fixed MPCIE2 assemble.
31. MPCIE: (50.95x30mm socket 52Pin),mini PCIE socket, it is located at the bottom, it
supports mini PCI-E devices with USB2.0, SMBUS and PCI-E signal.
32. CF: CF Card socket, it is located at the bottom of the board and serves as an insert
interface for Type I and Type II Compact Flash card. The operating voltage of CF card
can be set as 3.3V or 5V. The default setting of the product is 5V.
33. DDR3: (SO-DIMM 204Pin socket), DDRIII memory socket, the socket is located at the
bottom of the board and supports 204Pin 1.5V DDRIII 800MHz FSB SO-DIMM memory
module up to 2G.
34. MPCIE SCREW HOLES: one screw holes for fixed MPCIE assemble.