User manual

APC-3X98(A) User Manual

Change User Password

← Select Screen

↑↓ Select Item

Enter Charge

F1 General Help

F10 Save and Exit

ESC Exit

Boot Sector Virus Protection [Disabled]

Change Supervisor Password:

Install or Change the password.

Change User Password:

Install or Change the password.

Boot Sector Virus Protection:

[Disabled]

[Enabled]

Enabled / Disabled Boot Sector Virus Protection.

Type the password with up to 6 characters and then press Enter key. This will

clear all previously typed CMOS passwords. You will be requested to confirm the

password. Type the password again and press Enter key. You may press Esc

key to abandon password entry operation.

To clear the password, just press Enter key when password input window

pops up. A confirmation message will be shown on the screen as to whether the

password will be disabled. You will have direct access to BIOS setup without typing

any password after system reboot once the password is disabled.

Once the password feature is used, you will be requested to type the password

each time you enter BIOS setup. This will prevent unauthorized persons from

changing your system configurations.

Also, the feature is capable of requesting users to enter the password prior to

system boot to control unauthorized access to your computer. Users may enable the

feature in Security Option of Advanced BIOS Features. If Security Option is set to

System, you will be requested to enter the password before system boot and when

entering BIOS setup; if Security Option is set to Setup, you will be requested for

password for entering BIOS setup.