User manual

APC-3X98(A) User Manual
23
23. H3/H4/H5/H6: Intel Atom Z530P(or Z510P) CPU+ US15W Heat Sink SCREW HOLES, Four
screw holes for Intel CPU and US15W Heat Sink assemble.
24. LED1/LED2: LED STATUS. LED1:Motherboard Standby Power Good status 。 LED2:
Motherboard CPU Power Good status.
25. USB67: (2.0mm Pitch 2x5 Pin Header),Front USB connector, it provides two USB ports via a
dedicated USB cable, speed up to 480Mb/s.
USB6 and USB7 can only be used for internal device attachment as USB 2.0 SpecIfi-
cation, Can not support USB1.1 and USB 1.0 Specification.
Signal Name
Pin#
Pin#
Signal Name
+5V
1
2
+5V
USB6_N
3
4
USB7_N
USB6_P
5
6
USB7_P
Ground
7
8
Ground
NC
9
10
Ground
Note:
Before connection, make sure that pin out of the USB Cable is in accordance with that of the said
tables. Any inconformity may cause system down and even hardware damages.
26. IDE_CF1: (CF Card socket), it is located at the bottom of the board and serves as an insert
interface for Type I and Type II Compact Flash card. The operating voltage of CF card can be set as
3.3V or 5V. The default setting of the product is 3.3V.
27. JTAG1: Reserve.