User manual

APC-3X98(A) User Manual
20
18. JP2: (2.0mm Pitch 2x3 Pin Header), SATA1/SATA2/CF Devices Master or slave jumper setting.
SATA1/ SATA2/ CF devices can only be used two at the same time, and the Master device can be
set one only. While using SATA1/SATA2 devices at the same time, one of the devices must be
set as Master.
JP2
Devices Master
1~2 on
3~4 off
5~6 off
CF Master
1~2 off
3~4 on
5~6 off
SATA1 Master
1~2 off
3~4 off
5~6 on
SATA2 Master
19. MPCIE1: (50.95mmx30mm Socket 52Pin), mini PCIE socket, it is located at the top, it supports
mini PCI-E devices with USB2.0, SMBUS and PCI-E signal.
20. H1/H2: MPCIE1 SCREW HOLES, H1 for mini PCIE card (50.95mmx30mm Socket 52 Pin)
assemble. H2 Reserve.
21. SDVO1: (1.27 x 2.54mm Pitch 2x15 Pin Header), SDVO bus, connect SDVO to VGA
card or SDVO to LVDS card or SDVO to HDMI card or SDVO to DVI Card。