User manual

APC-3580 User Manual
88
Resume on Ring [Disabled] The Resume on Ring BIOS option specifies if the system will be roused
from a suspended or standby state when there is activity on the RI (ring in) modem line. That is,
the system will be roused by an incoming call on a modem.

Disabled DEFAULT Wake event not
generated by an incoming call

Enabled Wake event generated by an incoming call
Resume on Lan [Disabled] The Resume on Lan BIOS option specifies if the system is roused from
a suspended or
standby state when there is activity on the LAN.

Disabled DEFAULT Wake event not generated by
LAN activity

Enabled Wake event generated by LAN activity
Resume on PME# [Disabled] The Resume on PME# BIOS option
specifies if the system will be roused from a suspended or
standby state when there is activity on the PCI PME (power
management event) controller.

Disabled DEFAULT Wake
event not generated by PCI PME controller activity

Enabled
Wake event generated by PCI PME controller activity
Resume On RTC Alarm [Disabled]
The Resume On RTC Alarm determines when the computer is roused from a suspended
state.

Disabled DEFAULT The real time clock (RTC) cannot generate a wake event

Enabled If selected, the following appears with values that can be
selected:
RTC Alarm Date (Days)
System Time
After setting the alarm, the computer turns itself on from a
suspend state when the alarm goes off.