User manual

APC-3580 User Manual
87

Monitor DEFAULT The system monitors the secondary master IDE device and rouses the
system from a sleep or suspend state when an IRQ is detected.
Secondary slave IDE [MONITOR]
The Power Management/APM option must be enabled in order to change this configuration
option. The Secondary Slave IDE option enables monitoring of activity of the secondary slave
IDE device and rouses the system from a sleep or suspend state.

Ignore DEFAULT The system does not monitor the secondary slave IDE device and
does not rouse the system from a sleep or suspend state when an IRQ
is detected.

Monitor The system monitors the secondary slave IDE device and rouses the
system from a sleep or suspend state when an IRQ is detected.
System Thermal [Disabled]
The System Thermal BIOS option enables the manual setting of the Thermal Active
Temperature and the THRM throttle Ratio BIOS options.

Disabled DEFAULT Thermal Active Temperature and the THRM throttle Ratio BIOS
options cannot be set manually.

Enabled Thermal Active Temperature and the THRM throttle Ratio BIOS
options can be set manually.
Power Button Mode [On/Off]
The Power Button Mode BIOS specifies how the power button functions.
On/Off
DEFAULT
When the power button is pressed the
system is either
turned on or off
Suspend
When the power button is pressed the
system goes into
suspend mode