User manual

APC-3580 User Manual
86

Monitor DEFAULT The system monitors the FDC/LPT/COM ports and rouses the system from a
sleep or suspend state when an IRQ is detected.
Primary master IDE [MONITOR]
The Power Management/APM option must be enabled in order to change this configuration option.
The Primary Master IDE option enables monitoring of activity of the primary master IDE device and
rouses the system from a sleep or suspend state.
Ignore
The system does not monitor the primary
master IDE
device and does not rouse the system from
a sleep or
suspend state when an IRQ is detected.
Monitor
DEFAULT
The system monitors the primary master
IDE device and
rouses the system from a sleep or suspend
state when
an IRQ is detected.
Primary slave IDE [MONITOR]
The Power Management/APM option must be enabled in order to change this configuration option.
The Primary Slave IDE option enables monitoring of activity of the primary slave IDE device and
rouses the system from a sleep or suspend state.

Ignore The system does not monitor the primary slave IDE device and does not
rouse the system from a sleep or suspend state when an IRQ is detected.

Monitor DEFAULT The system monitors the primary slave IDE device and rouses the system
from a sleep or suspend state when an IRQ is detected.
Secondary master IDE [MONITOR]
The Power Management/APM option must be enabled in order to change this configuration option.
The Secondary Master IDE option enables monitoring of activity of the secondary master IDE device
and rouses the system from a sleep or suspend state.

Ignore The system does not monitor the secondary master IDE device and does not
rouse the system from a sleep or suspend state when an IRQ is detected.