User manual

APC-3580 User Manual
79
Init. Graphic Adapter Priority [Internal VGA]
The Init. Graphic Adapter Priority option selects the graphics controller the system uses as a
primary boot device. The options are:
ٛ
Internal VGA
ٛ
PCI/Int-VGA
Internal Graphics Mode Select [Enable, 8MB]
Use the Internal Graphic Mode Select option to specify the amount of system memory that can be
used by the Internal graphics device.
Disable
Enable, 1MB
1MB of memory used by internal
graphics device
Enable, 4MB
4MB of memory used by internal
graphics device
Enable, 8MB
DEFAULT
8MB of memory used by internal
graphics device
Enable, 16MB
16MB of memory used by internal
graphics device
Enable, 32MB
32MB of memory used by internal
graphics device
Graphics Aperture Size [64MB]
The Graphics Aperture Size option selects the size of the AGP aperture. The aperture is a portion of
the PCI memory address range dedicated as graphics memory address space.

64MB DEFAULT Graphics aperture size set as 64MB

128MB Graphics aperture size set as 128MB

256MB Graphics aperture size set as 256MB
Boot Display Device [Auto]
The Boot Display Device BIOS option selects the display device the system uses when it boots. The
available options are listed below:
ٛ
Auto (Default)