User manual

APC-3580 User Manual
69

Enabled PCI devices are informed that an ISA based Graphics device is installed in
the system so the ISA based Graphics card functions correctly. This does not
necessarily indicate a physical ISA adapter card. The graphics chipset can
be mounted on a PCI card. Always check with the adapter card manual first,
before modifying the default settings in the BIOS.
PCI IDE BusMaster [Disabled]
Use the PCI IDE BusMaster BIOS option to enable or prevent PCI IDE busmastering.
Disabled
DEFAULT
Busmastering is prevented
Enabled
IDE
controller on the PCI
local bus
has
mastering
capabilities
OffBoard PCI/ISA IDE Card [Auto]
Use the OffBoard PCI/ISA IDE Card BIOS option to select the OffBoard PCI/ISA IDE Card.

Auto DEFAULT The location of the Off Board PCI IDE adapter card is automatically
detected by the AMIBIOS.

PCI Slot 1 PCI Slot 1 is selected as the location of the OffBoard PCI IDE adapter card.
Only select this slot if the adapter card is installed in PCI Slot 1.

PCI Slot 2 PCI Slot 2 is selected as the location of the OffBoard PCI IDE adapter card.
Only select this slot if the adapter card is installed in PCI Slot 2.

PCI Slot 3 PCI Slot 3 is selected as the location of the OffBoard PCI IDE adapter card.
Only select this slot if the adapter card is installed in PCI Slot 3.
PCI Slot 4 PCI Slot 4 is selected as the location of the OffBoard PCI IDE adapter card.
Only select this slot if the adapter card is installed in PCI Slot 4.
PCI Slot 5 PCI Slot 5 is selected as the location of the OffBoard PCI IDE adapter card.
Only select this slot if the adapter card is installed in PCI Slot 5.
PCI Slot 6 PCI Slot 6 is selected as the location of the OffBoard PCI IDE adapter card.
Only select this slot if the adapter card is installed in PCI Slot 6.
IRQ# [Available]