User manual

APC-3580 User Manual
56
system and the parallel port device and the
transmission rates between the two are
much faster
than the Normal mode
The parallel port is also be compatible with EPP devices described above
Parallel Port IRQ [IRQ7] Use the Parallel Port IRQ selection to set the parallel port interrupt address.

IRQ5 IRQ5 is assigned as the parallel port interrupt address

IRQ7 DEFAULT IRQ7 is assigned
as the parallel port interrupt address
Serial Port3 Address [3E8] Use the Serial Port3 Address option to select the base addresses for
serial port 3

Disabled No base address is assigned to serial port 3

3E8 DEFAULT Serial port 3 I/O port
address is 3E8

2F8 Serial port 3 I/O port address is 2F8

3E8 Serial port 3 I/O port address is
3E8

2E8 Serial port 3 I/O port address is 2E8

2F0 Serial port 3 I/O port address is 2F0

2E0
Serial port 3 I/O port address is 2E0
Serial Port3 IRQ [11] Use the Serial Port3 IRQ option to select the interrupt address for serial port 3.

4 Serial port 3 IRQ address is 4

9 Serial port 3 IRQ address is 9

10 Serial port 3 IRQ address is 10

11 DEFAULT Serial port 3 IRQ address is 11
Serial Port4 Address [2E8] Use the Serial Port4 IRQ option to select the interrupt address for serial
port 4.

Disabled No base address is assigned to serial port 3

3F8 Serial port 4 I/O port address is 3F8

2F8 Serial port 4 I/O port address is 2F8

3E8 Serial port 4 I/O port address is 3E8