User manual
APC-3580 User Manual
53
ٛ
720 KB 3 ½”
ٛ
1.44 MB 3½”
ٛ
2.88 MB 3½”
4.3.4 Super IO Configuration
Use the Super IO Configuration menu (BIOS Menu 7) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
BIOS Menu 7: Super IO Configuration
On Board Floppy Controller [Enabled]
Disabled Allows BIOS to disable the floppy controller
Enabled DEFAULT Allows BIOS to enable the floppy controller
Serial Port1 Address [3F8/IRQ4] Use the Serial Port1 Address option to select the Serial Port 1
base address.
Disabled
No base address is assigned to Serial Port
1
3F8/IRQ4
DEFAULT
Serial Port 1 I/O port address is 3F8 and
the interrupt
address is IRQ4