User manual

APC-3580 User Manual
51
(This setting generally works with all hard
disk
drives
manufactured after 1999. For other disk drives, such as IDE
CD-ROM drives, check the specifications of the drive.)
DMA Mode [Auto] Use the DMA Mode BIOS selection to adjust the DMA mode options.

Auto DEFAULT BIOS auto detects the DMA mode. Use this value if the IDE disk drive
support cannot be determined.
S.M.A.R.T [Auto]
Use the S.M.A.R.T option to auto-detect, disable or enable Self-Monitoring Analysis and
Reporting Technology (SMART) on the drive on the specified channel. S.M.A.R.T predicts
impending drive failures. The S.M.A.R.T BIOS option enables or disables this function.

Auto DEFAULT BIOS auto detects HDD SMART support.

Disabled Prevents BIOS from using the HDD SMART feature.
Enabled Allows BIOS to use the HDD SMART feature
32Bit Data Transfer [Disabled] Use the 32Bit Data Transfer BIOS option to enables or disable
32-bit data transfers.
Disabled DEFAULT Prevents the BIOS from using 32-bit data transfers.

Enabled Allows BIOS to use 32-bit data transfers on supported hard disk drives.
4.3.3 Floppy Configuration
Use the Floppy Configuration menu (BIOS Menu 6) to set or change the configurations for
floppy disk drives.