User manual

APC-3580 User Manual
41
F1 key General help, only for Status Page Setup Menu
and Option Page Setup Menu
F2 /F3 key Change color from total 16 colors. F2 to select
color forward.
F10 key
Save all the CMOS changes, only for Main
Menu
Table 5-1: BIOS Navigation Keys
4.1.3 Getting Help
When F1 is pressed a small help window describing the appropriate keys to use and the possible
selections for the highlighted item appears. To exit the Help Window press ESC or the F1 key
again.
4.1.4 Unable to Reboot After Configuration Changes
If the computer cannot boot after changes to the system configuration is made, CMOS defaults.
Use the jumper described in Chapter Chapter 3, Section 3.4.2.
4.1.5 BIOS Menu Bar
The menu bar on top of the BIOS screen has the following main items:
ٛ
Main Changes the basic system configuration.
ٛ
Advanced Changes the advanced system settings.
ٛ
PCIPnP Changes the advanced PCI/PnP Settings
ٛ
Boot Changes the system boot configuration.
ٛ
Security Sets User and Supervisor Passwords.
ٛ
Chipset Changes the chipset settings.
ٛ
Power Changes power management settings.
ٛ
Exit Selects exit options and loads default settings
The following sections completely describe the configuration options found in the menu items
at the top of the BIOS screen and listed above.
4.2 Main
The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The
Main menu gives an overview of the basic system information.