User manual

APC-3580 User Manual

Jumper Label: JP6

Jumper Type: 3-pin header

Jumper Settings: See Table 3-34

Jumper Location: See Figure 3-29

This jumper allows the user to set the voltage for the LCD panel. Before setting this jumper please

refer to the LCD panel user guide to determine the required voltage. After the required voltage is

known, make the necessary jumper setting in accordance with the settings shown in Table 3-34

(LCDVCC signal indicates pin 27-30 defined in Table 3-16: LVDS Connector Pinouts).

JP6 DESCRIPTION

1-2

closed

LCDVCC = +3.3V

(default)

2-3

closed

LCDVCC = +5V

Table 3-34: JP6 Jumper Settings

3.4.4 PC/104+ Selector Jumper Label: JP5 Jumper Type: 2-pin header

Jumper Settings: See Table 3-35 Jumper Location: See Figure 3-29

JP5 DESCRIPTION

Open Disconnect (default)

Close Connect

Table 3-35: JP5 Jumper Settings