User manual

APC-3580 User Manual

3.3 External (Rear Panel) Connectors

Figure 3-26 shows the MOTHERBOARD board rear panel. The peripheral connectors on the back

panel can be connected to devices externally when the MOTHERBOARD is installed in a chassis. The

peripheral connectors on the rear panel are:

.1 x RJ-45 Ethernet connector

.1 x PS/2 keyboard/mouse connector

.1 x Serial port connector

.4 x USB2.0 connectors

.1 x VGA connector

3.3.1 Ethernet Connector

CN Label: J1

CN Type: RJ-45

CN Location: See Figure 3-26 (labeled number 3)

CN Pinouts: See Table 3-25

The MOTHERBOARD is equipped with LAN 10/100/1000-TX Ethernet controller. The Ethernet

connector can be directly connected to a Local Area Network (LAN) through a network hub. An

RJ-45 Ethernet connector is shown in Figure 3-27.