User manual

APC-3580 User Manual

3.2.5 Battery Connector CN Label: BT1

CN Type: 1x2 pin header

CN Location: See Figure 3-7

The battery connector is connected to a preinstalled VARTA CR2032 3V battery

3.2.6 12V Power Connector

CN Label: CN4

CN Type: 1x4 pin header

CN Location: See Figure 3-8

CN Pinouts: See Table 3-8

Connects a power source from a power supply unit (PSU) to the MOTHERBOARD.

PIN NO. DESCRIPTION

1 GND

2 GND

3 VCC12

4 VCC12

Table 3-8: 12V Power Connector Pinouts

3.2.6 Compact Flash Type 2 Socket

CN Label: CN6

CN Type: 50-pin

CN Location: See Figure 3-9

CN Pinouts: See Table 3-9

A CFII (compact flash type II connector) is located on the solder side of the MOTHERBOARD. The

CFII connector is for applications without external storage. The Compact Flash socket provides an

alternative to hard disk drives in applications where hard disk drives may consume too much space

and storage capacity is not a requirement. The CF card behaves like a secondary IDE master