User manual

APC-3580 User Manual
13
Chapter 3_____________________________
Mainboard
Thank you for choosing the socket 479 (mobile) Pentium M single board computer. The mainboard is
equipped with a high-performance processor and multi-mode I/O designed for the system
manufacturers and integrators.
In addition, the VGA controller of the board’s built-in AGP4X VGA (Intel 852GM) has 3D graphics
capability, which provides up to 2048 x 1536 x 32-color resolution. The onboard VGA shares 32MB
(max.) system DDR-SDRAM.
An advanced high-performance super AT I/O chip -- Winbond W83627HF and Fintek F81216D are
used in the mainboard. On-chip UARTs are compatible with the NS16C550. The parallel port and IDE
interface are compatible with IBM PC/AT architecture.
It has the 82551/541 LAN controller. They are fully integrated 10 base-T, 100 base-TX LAN, or 1000
base-TX solutions with high-performance networking functions and low-power consumption.
The board uses Intel® 852GM chipset, which are 100% software compatible and are of PCI 2.2
standard.
3.1 Specifications
CPU:
Socket 479 for Intel® Pentium® M CPU with 333/400MHz FSB, Max. up to 1.7GHz
Onboard ULV Intel® Celeron® M 800MHz with 512KB L2 cache
Chipset:
Intel® 852GM + ICH4
System Memory:
One 200-pin DDR SO-DIMM supporting DDR266 SDRAM up to 1GB
Display:
Display controller
Intel GMCH integrated graphics controller
Integrated AGP 4X 2D/3D engine
One VGA port for CRT monitor 1600x1200@8bpp, 1280x1024@16bpp