User manual

APC-3580 User Manual
12
2.7 Installation of HDD
Now mount the HDD with each bracket
tightened by its side on the space found in the
system board. To put the HDD in place,
fasten the four screws as shown in the
picture.
2.8 Connecting HDD Cable
Lastly, connect one end of the HDD cable to
the IDE socket while the other end is
connected to the HDD interface, making sure
the red stripe found on the cable is correctly
connected to Pin 1.
*** Please note that to close the back cover of the Panel PC, please follow
Steps 2.5, 2.4, 2.3, 2.2 and 2.1 as shown above.
Location of DIMM Slot
The location of the DIMM slot as circled in
the picture is found on the reverse side of the
board.
DIMM Slot