User manual

APC-3580 User Manual
11
2.4 Unfastening of Inside Cover
Unfasten the 6 screws as circled in the
picture to open the inside cover where the
system board is.
2.5 Removal of Inside Cover
To totally remove the inside cover, place one
hand at one corner of the cover as shown by
the circle in the picture, and place the other at
the other corner, and give it a push in the
direction of the arrow as shown in the picture.
2.6 Fastening of HDD
Circled in the picture are two HDD brackets
used to mount the HDD on the system board.
Before doing the mounting, place the
brackets by the sides of the HDD and tighten
them with the screws as shown by the arrows
in the picture.