User manual

APC-3580 User Manual
109
then click Next to continue.
Step 3: In the follow-up window, please select SCSI and RAID controllers, and then click
Next to continue.
Step
4:
In the follow-up window, click Have Disk, then insert the driver
diskette and type in the driver location: e.g., a CD-ROM, then
click OK to continue.
Step
5:
In the follow-up window, select ALi SATA/RAID Controller,
then click Next to continue.
Step
6:
Confirm the follow-up windows and click the Finish button to
continue.
Step
7:
Please "confirm" the Digital Signature Not Found window when
it appears, when finished, please restart the computer.
Step
8:
Repeat step 1, but select ALi ATA/RAID Controller at step 4.
Introduction
The MOTHERBOARD board comes with an onboard Realtek ALC655 CODEC. Realtek
ALC655 is a 16-bit, full duplex AC’97 Rev. 2.3 compatible audio CODECwith a sampling rate of
48KHz.
D.1.1 Accessing the AC ’97 CODEC
The CODEC is accessed through one 16-pin header including:
1 A LINE input shared with surround output
2 A MIC input shared with Center and LFE output
3 A LINE output
4 A MIC input line.
D.1.2 Driver Installation
The driver installation has been described in Chapter 6, Section 6.3.
After rebooting the sound effect configuration utility appears in the Windows Control Panel (see