User manual

APC-3x15 User Manual
41
time.
Time
The time format is: Hour: 00 to 23
Minute: 00 to 59
Second: 00 to 59
To set the time, highlight the “Time” field and use the <PgUp>/<PgDn> or +/- keys to set the current
time.
IDE Primary HDDs/IDE Secondary HDDs
The onboard PCI IDE connectors provide Primary and Secondary channels for connecting up to four
IDE hard disks or other IDE devices. Each channel can support up to two hard disks; the first is the
“Master” while the second, the “Slave”.
Press <Enter> to configure the hard disk. The selections include Auto, Manual, and None. Select
“Manual” to define the drive information manually. You will be asked to enter the following items:
CYLS: Number of cylinders
HEAD: Number of read/write heads
PRECOMP: Write precompensation
LANDING ZONE: Landing zone
SECTOR: Number of sectors
The Access Mode selections are as follows:
CHS (HD<528MB)
LBA (HD>528MB and supports Logical Block Addressing)
Large (for MS-DOS only)
Auto
Remarks: The mainboard supports two serial ATA ports and are represented in this setting as IDE
channel 0.
Drive A /Drive B
These fields identify the types of floppy disk drive A or drive B that has been installed in the computer.
The available specifications are:
360KB 1.2MB 720KB 1.44MB 2.88MB
5.25 in 5.25 in 3.5 in 3.5 in 3.5 in
Video
This field selects the type of video display card installed in your system. You can choose the following
video display cards: