User manual

APC-3x15 User Manual
19
2.2 Installations
This section provides information on how to use the jumpers and connectors on the mainboard in
order to set up a workable system.
2.2.1 Installing the CPU
The mainboard supports a Socket 478MT (Napa) processor socket for Intel® Core
TM
2 Duo , Intel®
Core
TM
Duo and Intel® Core
TM
Solo mobile processors.
The processor socket comes with a screw to secure the processor. As shown in the left picture below,
loosen the screw first before inserting the processor. Place the processor into the socket by making
sure the notch on the corner of the CPU corresponds with the notch on the inside of the socket. Once
the processor has slide into the socket, fasten the screw. Refer to the figures below.
Figure 2.2: Installation of CPU
Note:
Ensure that the CPU heat sink and the CPU top surface are in total contact to avoid CPU overheating
problem that would cause your system to hang or be unstable.