User manual

APC-3228 User Manual
66
- GbE Wake up From S5
This field specifies whether the system will be awakened from the S5 power
saving mode when activity or input signal of onboard LAN is detected.
 OnBoard LAN Boot ROM
Options are “Enabled” and “Disabled”. Select “Disabled” if you don’t want to use onboard LAN Boot
Rom.
 HDA Controller
Options are “Enabled” and “Disabled”. Select “Disabled” if you don’t want to use HDA controller.
 Amplifier Gain(dB)
Options are “15.3 dB”, “21.2 dB”, “27.2 dB” and “31.8 dB”.
 SLP_S4# Min. Assertion Width
The choices are 4 to 5 seconds, 3 to 4 seconds, 2 to 3 seconds, and 1 to 2 seconds.
 PCIE Ports Configuration
Option Description
PCIE Port 0 This setting allows to enable the PCIE Port 0. The choices
are Auto, Enabled, and Disabled.
PCIE Port 1 This setting allows to enable the PCIE Port 1. The choices
are Auto, Enabled, and Disabled.
PCIE Port 2 This setting allows to enable the PCIE Port 2. The choices
are Auto, Enabled, and Disabled.
PCIE Port 3 This setting allows to enable the PCIE Port 3. The choices
are Auto, Enabled, and Disabled.
PCIE High Priority Port This setting allows to select the PCIE High Priority Port. The
choices are Disabled, Port 0, Port 1, Port 2 and Port 3.