User manual

APC-3228 User Manual

North Bridge Configuration

You can use this screen to select options for the North Bridge Configuration. Use the up and down

<Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected

option.

Note: The North Bridge Configuration setup screen varies depending on the supported North Bridge

chipset.

 Boots Graphics Adaptor Priority

This item selects which graphics controller to use as the primary boot device. The options are IGD,

PCI/IGD, PCI/PEG, PEG/IGD, PEG/PCI. The default setting is PEG/PCI.

 Internal Graphics Mode Select

This item selects the amount of system memory used by the internal graphics device. The choices are

Disabled, Enabled 32MB, Enabled 64MB, and Enabled 128MB.

 Video Function Configuration