User manual

APC-3228 User Manual

2E8/IRQ11 Set this value to allow the serial port to use 2E8 as its I/O port address and

IRQ11 for the interrupt address. This is the default setting. If the system will not

use a serial device, it is best to set this port to Disabled.

 Serial Port5 Address

This option specifies the base I/O port address of serial port 5. The Optimal setting is 2E0.

 Serial Port5 IRQ

This option specifies the Interrupt Request address of serial port 5. The Optimal setting is 5.

Option Description

Disabled Set this value to prevent the serial port from accessing any system resources.

When this option is set to Disabled, the serial port physically becomes

unavailable.

2E0/IRQ5 Set this value to allow the serial port to use 2E0 as its I/O port address and

IRQ5 for the interrupt address. This is the default setting. If the system will not

use a serial device, it is best to set this port to Disabled.