User manual

AHM-6159P User Manual
21
24. SATA_P1: (2.5mm Pitch 1x2 box Pin Header),an onboard 5V output
connector is reserved to provide power for IDE/SATA devices.
Pin#
Signal
Name
1
+DC5V
2
Ground
Note:
Output current of the connector must not be above 1A.
25. JP_104P: (2.0mm Pitch 1X3 Pin Header) PC104+ port voltage selection
jumper,select voltage for PCI-104 Plus device. The default for this jumper is “all
open”,meaning the user must select the voltage to be used.
JVCCIO
PC104+ VCCIO
Voltage
all Open
Default
CLOSE 1-2
+3.3V PCI Card
CLOSE 2-3
+5V PCI Card
26. PC104+: (4x30 Pin), PC104 plus connector, it conforms to standard PC104+
specification. Can expand support four PCI devices.
27. H1/H2/H3/H4: CPU FAN SCREW HOLES, Four screw holes for fixed CPU
Cooler assemble.
28. H7/H8/H9/H10: GM45+ICH9M Heat Sink SCREW HOLES, Four screw holes
for intel GM45 and ICH9M Heat Sink assemble.
29. H11/H12/H13: PC104+ CARD SCREW HOLES, Three screw holes for
PC104+ card assemble.
30. LED1/LED3: LED STATUS. LED1:Motherboard Standby Power Good