ADP- 11x6 Display Monitor User Manual Release Date Apr 2010 ®2010 Aplex Technology, Inc. Revision All Rights Reserved. V1.0 Published in Taiwan Aplex Technology, Inc. 15, No. 186, Jian Yi Road, Chung Ho City, Taipei County, Taiwan Tel: 886-2-82262881 Fax: 886-2-82262883 E-mail: aplex@aplex.com.tw URL: www.aplex.com.
Warning!___________________________________ This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual. It may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment.
Table of Contents______________________ Warning!…………………………………………………………………………….……..….2 Disclaimer………………………………………………………………….…………………2 Chapter 1 Getting Started 1.1 Features………………………………………………………….…..…..…4 1.2 Specifications…………………………………………. ...……………...….4 1.3 Dimensions…………………………………...………………………….…6 1.4 Brief Description...................................................................................10 1.5 Display Mode………………………………………………………………11 Chapter 2 OSD 2.1 Front Panel Controls………….………………………………….…..
Chapter 1_____________________________ 1.1 Features ●Stainless Steel Display ●Five edges panel NEMA 4/IP 65 rated ● Resistive touch screen (optional) ●VESA mount ●VGA Input, with optional DVI, Video or S-Video input ●Supports wide-ranging resolutions from 640x480 to up to 1600x1200 with auto phase and auto position 1.2 Specifications Display Model No. ADP-1126 ADP-1156 ADP-1176 ADP-1196 Display 12.
Dimensions 330x50x260 398x53x316mm 432x57.4x358 470x60x388.
1.3 Dimensions Figure 1.
Figure 1.
Figure 1.
Figure 1.
1.4 Brief Description The ADP-11x6 features an excellent viewing ability for monitoring and control applications. It is available with resistive touch screen that is easy to use and maintain. The front panel of the display monitor is sealed with gasket for NEMA 4/IP 65 rating when it is panel-mounted in a NEMA rated cabinet or enclosure. Figure 1.5: Front View of the ADP-11x6 Figure 1.
1.5 Display Mode Display Mode VGA 640 x 480 SVGA 800 x 600 XGA 1024 x 768 1152 x 864 SXGA 1280 x 1024 ADP-11x6 User Manual Hori. Sync (KHz) Vert. Sync.
Chapter 2_____________________________ 2.1 On Screen Display Controls Power switch: To turn ON or OFF the power Shift the icon to the right side or shift it up Shift the icon to the left side or shift it down Menu: To enter OSD menu for related icon and item. Auto Button: One-touch auto adjustment 2.2 OSD Controls To make any adjustment, select the following: 1. Press (Menu) to show the OSD menu or disable the OSD menu. 2. Select the icon that you wish to adjust with the ( / or +/-) key in the menu.
2.3 Main Menu In the Main menu, there are the following items: z Color z Image Setting z Position z OSD Menu z Language z Misc z Exit For Color, check out the following: z Contrast z Brightness z Color Adjust z Color Temp z Back For Image setting, check out the following: z Clock z Phase z Gamma z Sharpness z Back In the Position, there are the following: z H. Position z V.
In the OSD menu, there are: z z z z OSD H. Pos. OSD V. Pos.
2.4 AD Board OSD Functions 1.) Getting into Burn-in Mode Before setting into a burn-in mode, first disconnect the AC power cord. Then press (don’t let them go) the buttons until the AC power cord is connected and the “RGB” appears on the top left corner of your screen. Now it can be put into the burn-in mode for changing colors. 2.) Getting Out of Burn-in Mode Before getting out of the burn-in mode, please first disconnect the AC power cord.
Appendix_____________________________ VESA Mounting The ADP-11x6 display monitor can be VESA-mounted as an option. Just carefully mount the arm onto the rear of the unit by fastening the given four screws as shown in Figure A. Figure 1.
