ACS-2701A IP67 Waterproof Box PC User Manual Release Date Revision Jun. 2011 V1.0 ®2011 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan Aplex Technology, Inc. 15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan Tel: 886-2-82262881 ACS-2701A User Manual Fax: 886-2-82262883 E-mail: aplex@aplex.com.tw URL: www.aplex.com.
Warning!____________________________________ This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual, it may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment.
Table of Contents______________________ Warning!…………………………………………………………………………….……..….2 Disclaimer………………………………………………………………….…………………2 Chapter 1 1.1 1.2 1.3 1.4 Getting Started Features…....………………….………………………….…………..…...…4 Specifications………………………………………….………….……...…..4 Dimensions…………………………………...……………….…………......6 Brief Description……………………………………….…………………7 Chapter 2 Hardware Installation 2.1 Mainboard.....…...………………………………….…………………………8 2.2 Component Locations...…...………………………………….
Chapter 1_____________________________ 1.1 Features Intel Atom Z510 1.1 GHz CPU built-in, upgrade to Z530 1.6 GHz CPU Intel US15W chipset 1GB DDR2 400 MHz DRAM on board Support 1 x 2.5” SATA HDD 1 x Mini PCIe slot Fanless design IP67 Waterproof Long life backup battery 1.2 Specifications System CPU: Intel Atom Z510 1.1 GHz CPU built-in, upgrade to Z530 1.6 GHz CPU Chipset: Intel US15W chipset System Memory: 1GB DDR2 400 MHz DRAM on board Storage: 1 x 2.
Mechanical Construction: Aluminum Dei casting chassis (Top Cover : heat sink design) Color: Black Dimensions: 223(W) x 62(D) x 147(H) mm Power Supply: DC 11~32V Input Environment Operating temperature: -20 ~ 60∘C Storage temperature: -20 ~ 70∘C Relative humidity: 10~90% @ 40∘C non-condensing Certificate CE/FCC Class A ACS-2701A User Manual 5
1.3 Dimensions Figure 1.
1.4 Brief Description of the ACS-2701A The ACS-2701A is a Fanless IP67 Waterproof Solution and ultra-compact standalone embedded controller, powered by onboard Intel Atom Z510 1.1GHz, and supporting 1 x USB Port, 1 x DB 15 Port for RS-232 and RS-485, 1 x VGA Port , 1 x LAN Port and totally IP67 rating connectors. It is ideal for Industrial Automation & Outdoor Automation, etc. and running factory operations from small visual interface and maintenance applications to large control process applications.
Chapter 2 Hardware Installation 2.1 Mainboard Figure 1.3: ASB- S700 Top- view connectors 2.1.1 JTAG1 2.1.
2.1.3 LVDS1 2.1.
Figure 1.4: ASB- S700 Bottom- view LED and Connectors 2.1.
2.1.
ACS-2701A User Manual 12
2.1.6.1 NC- Pin Means non- connected pin, part of the pins of CN1/ CN2 (left or right) are not connected for reservation Purpose 2.1.6.2 RSV- Pin This pin was reserved for specific function and definition maybe different from CN1 or CN3 (top or down) 2.1.6.3 GND ground pin 2.1.6.4 Power Supply Source Class There are four pins for power supply sources on CN1: 12V_S5, is defined for 12V standby power, connected Pin 1, 3, 5, 7, 9, 11 of total six pins, can secure transmission current up to 2.4 Amp.
2.1.6.8 Other Signals Pin36, US15W's GPIO3 signal (the initial status is defined as the output); Pin38, US15W's GPIOSUS0 signal (the initial status is defined as the input); Pin40, PCIE_PME # signal, the external device wake-up signal (#, said active-low); Pin42, US15W's GPIO8 signal; (can be defined for LAN disable signal) Pin92, US15W the GPIO6 signal; Pin98, SCH_SLP3 # signal, control system power supply; Pin100, SIO_PSON # signal, SIO transferred switching ON/ OFF power supply signal. 2.1.
2.1.7.1 NC- Pin Means non- connected pin, part of the pins of CN1/ CN2 (left or right) are not connected for reservation purpose.
2.1.7.2 Power Supply Pin CN2, CN4 defined two kinds of power supply sources. VCC_RTC, is defined for the Real-Time-Clock power supply, ASB-S700 is equipped with a lithium battery (CR2032) also the onboard battery is also for the baseboard used. 5V_S5, is defined for 5V Standby power source, connected Pin63, 65, 67, 69, 71, 73 of total of six pins, can secure transmission current up to 2.4 Amp. 2.1.7.3 LPC Bus Signal Pin36, 48 and odd-number of pin 19 ~ 29 are defined for LPC Bus signals. 2.1.7.
Pin47, EN_3V_5V_S5, CPU board send an auxiliary power supply signal to IO baseboard for operating.
2.2.1 PWR1/PWR2 The power input of PCB was co-designed with PWR1or PWR2 for pre-selection。 PWR1 will use CJT brand like A3963WV-2P type connectors，PWR2 may use DINKLE brand like DT-126RP-02P type connectors。PWR1/PWR2 are different housing design but same pin defined： 2.2.2 USB4/5 2.2.3 JP3 JP3 is designed for auto-on switch jumper with 2xPin-header as pitch 2.0mm type. JP3 defaulted with closed jumper, system will be on when DC power input.
2.2.5 MPCIE1 [ mini- PCI express ] Mini PCI Express slot for full-/ half- size add-in card，initial designed for full-size mPCIe could be fixed on A1 and B1，optional designed for half-size mPCIe could be fixed on C1 and D1 2.2.6 JP1 2.2.7 JP4 2.2.
2.2.9 INVERTER 2.2.10 JP2 2.2.11 SATA 2.2.
2.2.13 JP5 2.2.
2.2.
Figure 1.6: PB-703 R1.
2.2.
2.2.17 CN4 2.2.18 PB-703 assembly PCB dimension：115mm × 70mm ×1.6mm Main assembly holes like A，B，C，D of PB-703 may adapt to A、B、C、Dholes of ASB-S700 (SOM) and baseboard (PB-703) could be fixed by 4x 6mm +/- 0.1mm height nuts Mini-PCI express card could be fixed by A1，B1，C1，D1：default A1，B1 for full-size mPCIe add-on card and C1，D1 for half-size mPCIe add-on card.
Chapter 3 BIOS Setup 3.1 System Test and Initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal. The system can usually continue the boot up sequence with non-fatal errors.
Use this menu to specify your settings for integrated peripherals. (Primary slave, secondary slave, keyboard, mouse etc.) Power Management Setup Use this menu to specify your settings for power management. (HDD power down, power on by ring, KB wake up, etc.) PnP/PCI Configurations This entry appears if your system supports PnP/PCI. PC Health Status This menu allows you to set the shutdown temperature for your system.
Chapter 4 Installation of Drivers This chapter describes the installation procedures for software and drivers under the windows XP. The software and drivers are included with the motherboard. The contents include Intel chipset driver, VGA driver, LAN driver, Audio driver Installation instructions are given below.
4. Click Yes to accept the software license agreement and proceed with the installation process. 5. On Readme Information screen, click Next to continue the installation.
6. The Setup process is now complete. Click Finish to restart the computer and for changes to take effect.
ACS-2701A User Manual 31
4.2 VGA Driver installation To install the VGA Driver follow the steps below to proceed with the installation. Step 1. Insert the Aplex product CD That comes with the board. Step 2. Click “ Intel® VGA Chipset “ Step 3. When the Welcome screen appears , click “Next” to continue.
Step 4. Click YES to agree with the license agreement and continue the installation.
Step 5. The Setup process is now complete. Click Finish to restart the computer as promoted and for changes to take effect. When the computer has restarted, the system will be able to find some devices. Restart your computer when prompted.
4.3 Intel PRO LAN Drivers installation Follow the steps below to complete the installation of the Intel PRO LAN drivers. Step 1. Insert the Aplex product CD That comes with the board. Step 2. Click “Intel® Ethernet Driver“ Step 3. When the Welcome screen appears , click “Next” to continue.
ACS-2701A User Manual 36
Step 4.
4.4 Realtek Audio Driver installation To install the Realtek codec Driver follow the steps below to proceed with the installation. Step 1. Insert the Aplex product CD That comes with the board. Step 2. Click “Realtek ‘ Codec Sound system “ Step 3. When the Welcome screen appears, click “Next” to continue.
Step 4. Click “Finish” to restart the computer and for changes to take effect.
