User manual

9
ACS-2695A User Manual
1.4 Installation of HDD
Step 1
There is one screw which connects to the
chassis. Pull out the chassis towards the I/O
side after unscrewing as shown in the picture
ACS-2695A
Step 2
There are 2 screws to deal with when
enclosing or removing the HDD bracket as
shown in the picture ACS-2695A
Loosen screw and draw the HDD bracket
out as shown in the picture ACS-2695A
Step 3
Tighten the 1 screw as shown in the picture.
That’s how it should look after it has been
installed.