ACS-2685 Box PC User Manual Release Date Revision Nov. 2012 ® 2012 Aplex Technology, Inc. V1.0 All Rights Reserved. Published in Taiwan Aplex Technology, Inc. 15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan Tel: 886-2-82262881 Fax: 886-2-82262883 E-mail: aplex@aplex.com.tw ACS-2685 User Manual URL: www.aplex.com.
Warning!___________________________________ This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual, it may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment.
Packing List Accessories (as ticked) included in this package are: □ AC power cable □ Driver & manual CD disc □ Other.___________________(please specify) Safety Precautions Follow the messages below to prevent your systems from damage: ◆ Avoid your system from static electricity on all occasions. ◆ Prevent electric shock. Don‘t touch any components of this card when the card is power-on. Always disconnect power when the system is not in use. ◆ Disconnect power when you change any hardware devices.
Table of Contents______________________ Warning!…………………………………………………………………………….……..….2 Disclaimer………………………………………………………………….…………………2 Packing List…………………………………………………………………………………..3 Safety Precautions…………………………………………………………………………..3 Chapter 1 Getting Started 1.1 Specifications……………………………………….……………………..6 1.2 Dimensions………………………………...………………………….......8 1.3 Brief Description………………………..…………………………….……10 1.4 Installation of HDD………………….…………………………….…..11 1.5 Installation of PCI Add-on………..………………….……………………12 1.
Figures Figure 1.1: Dimensions of the ACS-2685 AC input………………….…..…....8 Figure 1.2: Dimensions of the ACS-2685 AC input with DVD Device…….…8 Figure 1.3: Dimensions of the ACS-2685 DC input…………………………...9 Figure 1.4: Dimensions of the ACS-2685 DC input with DVD Device...........9 Figure 1.5: Left-front View of ACS-2685......................................................10 Figure 1.6: Right-front View of ACS-2685...................................................10 Figure 1.7: Wall Mount of ACS-2685 Type 1.
Chapter 1 System 1.1 Specifications Specs ACS-2685 Processor Intel Socket P Core 2 Duo 45nm Processor, Up to P8600 2.4Ghz FSB1066/800/667MHz System Chipset Intel GM45 + Intel ICH9M-E System Memory 2 x 204 Pin DDR3 SO-DIMM slot, up to 8GB 800/1066 Front Side I/O Expansion Slots Storage Power Supply LED Indicator CD/DVD-R Device Wireless 2 x DB9 RS-232 1 x DB15 VGA 2 x RJ45 GbE LAN connectors 4 x USB 2.
Storage Humidity Vibration Shock 10%~90%@ 40℃, non-condensing MIL-STD-810F 514.5C-2 (with CF or SSD) 50G Half sine(11 msec.
1.2 Dimensions System Fan location Figure 1.1: Dimensions of the ACS-2685 AC input Figure 1.
System Fan location System Fan location Figure 1.3: Dimensions of the ACS-2685 DC input Figure 1.
1.3 Brief Description of the ACS-2685 The ACS-2685 is a Fan-less High-efficiency Thermal Solution and ultra-compact standalone Box PC, powered by an Intel Core 2 Duo with 45nm, up to P8600 2.4GHz, and supporting 4 x USB 2.0 ports, 4 x COM Ports, 1 x VGA, support PCI or PCIe Expansion, 2 x SATA HDD space, 1 x external CF slot, 9-32V wide-ranging power input etc. It is ideal for kiosks, POS systems, airport terminal controllers, digital entertainments, etc.
1.4 Installation of HDD Step 1 There is one screw which connects to the chassis. Pull out the chassis towards the I/O side after unscrewing as shown in the picture ACS-2685 Step 2 There are 2 screws to deal with when enclosing or removing the HDD bracket as shown in the picture ACS-2685 Step 3 Loosen screw and draw the HDD bracket out as shown in the picture ACS-2685 Step 4 That’s how it should look after it has been installed.
1.5 Installation of PCI Add-on Step 1 There is one screw which connects to the chassis. Pull out the chassis towards the I/O side after unscrewing as shown in the picture ACS-2685 Step 2 Now slide the add on into the PCI slot, making sure the golden part faces the slot. When the part that is interfaced together come into the right contact, slightly push the add on into the rail of the slot.
1.6 Instructions for use of internal USB dongle Step 1 There is one screw which connects to the chassis. Pull out the chassis towards the I/O side after unscrewing as shown in the picture ACS-2685 Step 2 Now slide into the USB dongle as shown in the picture ACS-2685 Step 3 Tighten the 1 screw as shown in the picture. That’s how it should look after it has been installed.
1.7 Installation of Wall Mount Bracket Figure 1.
Figure 1.
Figure 1.
Figure 1.
Figure 1.
Chapter 2 Hardware 2.1 Mainboard Figure 2.
2.2 Installations ASB-M801 is a Mini-ITX industrial motherboard developed on the basis of Intel GM45 and ICH9M, which provides abundant peripheral interfaces to meet the needs of different customers. Also, it features dual 1000M LAN port, 6-COM port and one Mini PCIE configuration. To satisfy the special needs of high-end customers, PC104+ type (120 pins, Aplex designed) connector richer extension functions. The product is widely used in various sectors of industrial control. 2.2.
Figure 2.3: Jumpers and Connectors Location_ Board Bottom 1. JP2: (2.0mm Pitch 1X2 Pin Header),ATX Power and Auto Power on jumper setting. 2. JP2 Mode Open ATX Power Close Auto Power on (Default) RTC/SRTC: (2.0mm Pitch 1X2 Pin Header)CMOS clear jumper, CMOS clear operation will permanently reset old BIOS settings to factory defaults.
Open NORMAL (Default) Close 1-2 Clear CMOS Procedures of CMOS clear: a) Turn off the system and unplug the power cord from the power outlet. b) To clear the CMOS settings, use the jumper cap to close pins1 and 2 for about 3 seconds then reinstall the jumper clip back to pins open. c) Power on the system again. d) When entering the POST screen, press the or key to enter CMOS Setup Utility to load optimal defaults. e) After the above operations, save changes and exit BIOS Setup. 3. BAT1 : (1.
AT (Default) 5. DCIN ATX12V input DC9~32V output DC 12V NC ATX12V: (2x2 Pin Connector),DC12V System power output connector. 6. Pin# Power output Pin1 Ground Pin2 Ground Pin3 DC+12V Pin4 DC+12V ATX (option): (2.0mm Pitch 1X3 box Pin Header), connect PSON and 5VSB and Ground signal,support ATX Power model. Reserved. 7. Pin# Signal Name Pin1 ATX PSON PIN2 ATX Ground PIN3 ATX 5VSB CPU1: (Socket P), installing the CPU Socket.
8. CPU_FAN1/SYS_FAN1: (2.54mm Pitch 1x3 Pin Header),Fan connector, cooling fans can be connected directly for use. You may set the rotation condition of cooling fan in menu of BIOS CMOS Setup. Pin# Signal Name 1 Ground 2 VCC 3 Rotation detection Note: Output power of cooling fan must be limited under 5W. 9. SODIMM1/SODIMM2: (SO-DIMM 204Pin socket), DDRIII memory socket, the socket is located at the Top of the board and supports 204Pin 1.5V DDRIII 800/1066MHz FSB SO-DIMM memory module up to 8GB.
C A CRT_V_SYNC 9 10 CRT_DDCCL K 12. INVERTER1: (2.0mm Pitch 1x6 box Pin Header), Backlight control connector for LVDS1. Pin# Signal Name 1 +DC12V 2 +DC12V 3 Ground 4 Ground 5 BKLT_EN 6 BKLT_CTRL Note: Pin6 is backlight control signal, support DC or PWM mode, mode select at BIOS CMOS menu. 13. LVDS1: (1.25mm Pitch 2x20 Connector), For 18/24-bit LVDS output connector, Fully supported by Intel GM45 chipset, the interface features dual channel 18/24-bit output.
LB_D2_P 22 21 LA_D2_P Ground 24 23 Ground LB_CLK_N 26 25 LA_CLK_N LB_CLK_P 28 27 LA_CLK_P Ground 30 29 Ground 32 31 LVDS_DOC_CLK Ground 34 33 Ground LB_D3_N 36 35 LA_D3_N LB_D3_P 38 37 LA_D3_P NC 40 39 NC LVDS_DDC_DATA 14. BT1: POWER on/off Button, They are used to connect power switch button. The two pins are disconnected under normal condition. You may short them temporarily to realize system startup & shutdown or awaken the system from sleep state. 15.
17. 2 RXD (Received Data) 3 TXD (Transmit Data) 4 DTR (Data Terminal Ready) 5 Ground 6 DSR (Data Set Ready) 7 RTS (Request To Send) 8 CTS (Clear To Send) 9 JCOM1 select Setting COM2: (Type DB9),Rear serial port, standard DB9 Male serial port is provided to make a direct connection to serial devices. Pin# 18.
19. JCOM6: (2.0mm Pitch 1x3 Pin Header) COM6 setting jumper, pin 1~3 are used to select signal out of pin 10 of COM6 port. JP1 Pin# 20. Function Close 1-2 COM5 Pin10=+5V (default) Close 2-3 COM5 Pin10=+12V (option) COM6: (2.0mm Pitch 2X5 Pin Header), COM6 Port, standard RS232 ports are provided. They can be used directly via COM cable connection. COM6 port is controlled by pins No.1~3 of JCOM6,select output Signal 5V or 12v, For details, please refer to description of JCOM6.
23. JACK1: (Diameter 3.5mm Double stack Jack), HD Audio port, An onboard Realtek ALC662 codec is used to provide high quality audio I/O ports. Line Out can be connected to a headphone or amplifier, MIC is the port for microphone input audio. 24. AUDIO: (2.0mm Pitch 2X6 Pin Header), Front Audio, An onboard Realtek ALC662 codec is used to provide high-quality audio I/O ports. Line Out can be connected to a headphone or amplifier.
27. JP_104P Pin# PC104+ VIO Voltage All Open Default Close 1-2 +3.3V PCI Card Close 2-3 +5V PCI Card PC104+ (option): (4x30 Pin), PC104 plus type connector. Can expand support four PCI devices. ASB-M801B/EB：PC104+ type connector in the Bottom. 28. PCIEX2 (option): (4x10 Pin), PCIe bus connector, it conforms to standard PCI Express x1 specification. Can expand support PCIe devices. ASB-M801B/EB：PCIEX2 connector in the Bottom. MODEL PC104+ / PCIEX2 ASB-M801B Bottom ASB-M801EB Bottom 29.
COM3 COM4 USB9 Ground 5 6 NC NC 7 8 NC NC 9 10 5V_S5 DCD4- 11 12 RXD4 TXD4 13 14 DTR4- Ground 15 16 DSR4- RTS4- 17 18 CTS4- RI4- 19 20 5V_S5 5V_USB_9 21 22 5V_USB_1011 USB9_N 23 24 USB10_N USB9_P 25 26 USB10_P Ground 27 28 Ground Ground 29 30 Ground 5V_USB_101 31 32 PWR_LED+ 1 USB11 32.
USB0 Ground 31 32 Ground 5V_USB_01 33 34 5V_USB_01 USB0_N 35 36 USB1_N USB0_P 37 38 USB1_P Ground 39 40 Ground USB1 Pin1-3: HDD LED, They are used to connect hard disk activity LED. The LED blinks when the hard disk is reading or writing data. Pin2-4: POWER LED, They are used to connect power LED. When the system is powered on or under S0/S1 state, the LED is normally on, when the system is under S4/S5 state, the LED is off.
. JCF/JSATA: (2.0mm Pitch 3x4 Pin Header), it provides selectable IDE_CF1 or SATA4 signal output control. Functio n Jumper setting SATA 4 (Default ) IDE_CF 1 (option) 34. SATA_P1/SATA_P2: (2.5mm Pitch 1x2 box Pin Header), Two onboard 5V output connectors are reserved to provide power for SATA devices. Pin# Signal Name 1 +DC5V 2 Ground Note: Output current of the connector must not be above 1A. 35.
MODEL SATA Color RAID ASB-M801B Black: SATA1/SATA2/SATA3/SATA4 No ASB-M801EB Blue: SATA1/SATA2/SATA3 Black: SATA4 Yes 36. IDE_CF1 (Option): (CF Card socket), it is located at the bottom of the board and serves as an insert interface for Type I and Type II Compact Flash card. The operating voltage of CF card can be set as 3.3V or 5V,The default setting of the product is 3.3V. Please refer to description of JCF/JSATA Jumper setting. 37.
40. TB-523: ASB-M801 I/O Card, via a dedicated cable connected to ASB-M801 MIO1 and MIO2. TB-523 Top： TB-523 Bottom： LED2: CF Card LED status. S1: PWR BT: POWER on/off Button, They are used to connect power switch button. The two pins are disconnected under normal condition. You may short them temporarily to realize system startup & shutdown or awaken the system from sleep state. PWR LED: POWER LED status. COM3: (Type DB9),I/O serial port, it provides selectable RS422/RS485 serial signal output.
RS422 Type (option) RS485 Type (option) Signal Name Pin# Pin# Signal Name 422_RX+ 1 1 NC 422_RX- 2 2 NC 422_TX- 3 3 485- 422_TX+ 4 4 485+ Ground 5 5 Ground NC 6 6 NC NC 7 7 NC NC 8 8 NC NC 9 9 NC Note: Use COM3 RS422 or RS485 Function, please enter BIOS CMOS Setup. Path: BIOS Setup Utility \ Advanced /Super IO Configuration \ Serial Port3 Type: [RS-485] [RS-422] JP4: (2.0mm Pitch 2x10 Pin Header) COM4 function setting jumper.
1 DCD# (Data Carrier Detect) 2 RXD (Received Data) 3 TXD (Transmit Data) 4 DTR (Data Terminal Ready) 5 Ground 6 DSR (Data Set Ready) 7 RTS (Request To Send) 8 CTS (Clear To Send) 9 RI (Ring Indicator) COM4 RS422 Type (option) COM4 RS485 Type (option) Signal Name Pin# Pin# Signal Name 422_RX+ 1 1 NC 422_RX- 2 2 NC 422_TX- 3 3 485- 422_TX+ 4 4 485+ Ground 5 5 Ground NC 6 6 NC NC 7 7 NC NC 8 8 NC NC 9 9 NC USB10: (Single stack USB type A), I/O USB con
CF: (CF Card socket), it is located at TB-523 and serves as an insert interface for Type I and Type II Compact Flash card. The operating voltage of CF card can be set as 3.3V or 5V. The default setting of the product is 5V. GPIO: (3.5mm Pitch 2x5 Pin Connector),General-purpose input/output port, it provides a group of self-programming interfaces to customers for flexible use.
ACS-2685 User Manual GPIO_IN4 9 10 5V_S5 DCD4- 11 12 RXD4 TXD4 13 14 DTR4- Ground 15 16 DSR4- RTS4- 17 18 CTS4- RI4- 19 20 5V_S5 5V_USB9 21 22 5V_USB1011 USB9_N 23 24 USB11_N USB9_P 25 26 USB11_P Ground 27 28 Ground GPIO_OUT1 29 30 GPIO_OUT2 5V_USB1011 31 32 SO_POWER_SENS E USB10_N 33 34 PWR_LED- USB10_P 35 36 PS_ON- Ground 37 38 Ground GPIO_OUT3 39 40 GPIO_OUT4 39
41. TB-521P1: TB-521P1 connect to ASB-M801B/EB PC104+ connector, PC104+ is located at the Bottom, It provides one PCI slot. 42. TB-521P2: TB-521P2 connect to ASB-M801B/EB PC104+ connector, PC104+ is located at the Bottom, It provides two PCI slots. 43. TB-521P1E1: TB-521P1E1 connect to ASB-M801B/EB PC104+ and PCIEX2 connector,PC104+ and PCIEX2 are located at the Bottom, It provides one PCI slot and one PCIE slot.
Chapter 3 BIOS Setup 3.1 Operations after POST Screen After CMOS discharge or BIOS flashing operation, the system will display the following screen for your further operation. Press F2 key to continue or F1 key to enter CMOS Setup. AMIBIOS© 2006 American Mega trends , Inc. BIOS Date: 05/13/11 22:54:20 Ver: 08.00.15 CPU : Genuine Intel(R) CPU 575 Speed : 2.00 GHz Press F11 for BBS POPUP Initializing USB Controllers. . 2013MB OK @ 2.00GHz Done. Auto-Detecting Pri Master..
3.2 BIOS SETUP UTILITY Press [Del] key to enter BIOS Setup utility during POST, and then a main menu containing system summary information will appear. BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit System Overview User [ENTER]，[TAB] AMIBIOS or Version [SHIFT-TAB] to Select a field : 08.00.15 Build Date : 05/13/11 ID Use[+] or [-] to :M801V001 configure system Time. Processor Genuine Intel(R) CPU Speed 575 @ 2.
System Time [00:02:28] F1 General Help System Date [Tue 05/13/2011] F10 Save and Exit ESC Exit V02.61 © Copyright 1985-2006 American Mega trends , Inc. System Time: Set the system time, the time format is: Hour : Minute : 0 to 23 0 to 59 Second : 0 to 59 System Date: Set the system date, the date format is: 3.4 Day: Month: Note that the ‘Day’ automatically changes when you set the date.
↑↓ Select Item Enter Charge Field F1 General Help F10 Save and Exit ESC Exit V02.61 © Copyright 1985-2006 American Mega trends , Inc. 3.4.1 CPU Configuration BIOS SETUP UTILITY Advanced Configure advanced CPU settings Module Version: 3F.10 For UP platforms, Manufacturer : Intel For DP/MP serves, Genuine Intel(R) CPU 575 @ 2.00GHz Frequency :2.00GHz FSB Speed : 668MHz Cache L1 :32 KB Cache L2 :1024 KB Leave it enabled. It may use to tune Performance to the Specific application.
[Enabled] [Disabled] Max CPUID Value Limit: [Disabled] [Enabled] Execute-Disable Bit Capability: [Enabled] [Disabled] Intel(R) C-STATE tech: [Disabled] [Enabled] 3.4.
ATA(PI) 80Pin Cable Detection Device] [Host & V02.61 © Copyright 1985-2006 American Mega trends , Inc. SATA#1 Configuration: [Compatible] [Disabled] [Enhanced] Configure SATA as: [IDE] [RAID] [AHCI] SATA#2 Configuration: [Enhanced] [Disabled] Hard Disk Write Protect: [Disabled] [Enabled] IDE Detect Time Out : [35] [0] [5] [10] [15] [20] [25] [30] ATA(PI) 80Pin Cable Detection: [Host & Device] [Host] [Device] 3.4.
BIOS SETUP UTILITY Advanced Configure Win627UHG Super IO Chipset Allow BIOS to Select Serial Port1 Address [3F8] Serial Port Base Serial Port2 Address [2F8] Address.
70℃/158℉ Vcore :1.064V AVCC :5.058V 5VCC :5.067 V 3.3V 5.0V :3.264 V :5.029 V 12V :12.042 V VSB :5.058 V VBAT :3.366 V Smart Fan Configuration Maximum CPU Temperature [60℃/140℉] Maximum PWM Duty for CPU Fan [60%] ← Select Screen ↑↓ Select Item +- Charge Field F1 General Help F10 ESC Save and Exit Exit V02.61 © Copyright 1985-2006 American Mega trends , Inc. System Temperature: Show you the current system temperature. CPU Temperature: Show you the current CPU temperature.
ACPI Version Features: [ACPI V1.0] [ACPI V2.0] [ACPI V3.0] ACPI APIC support: [Enabled] [Disabled] AMI OEMB table: [Enabled] [Disabled] Headless mode: [Disabled] [Enabled] [Chipset ACPI Configuration]: APIC ACPI SCI IRQ: [Disabled] [Enabled] High Performance Event Timer: [Disabled] [Enabled] 3.4.
► AHCI Port2 ► AHCI Port3 ► AHCI Port4 [Not Detected] [Not Detected] [Not Detected] ← Select Screen ► AHCI Port5 [Not Detected] ↑↓ Select Item Enter Go to sub screen F1 General Help F10 Save and Exit ESC Exit V02.61 © Copyright 1985-2006 American Mega trends , Inc. While entering setup, BIOS auto detects the presence of IDE devices. This displays the status of auto detecting of IDE devices 3.4.7 MPS Configuration BIOS SETUP UTILITY Advanced MPS Configuration Select MPS MPS Revision [1.
Active [Disabled] State Power -Management PCI Express L0s and L1 Link Power States. ← Select Screen ↑↓ Select Item +- Charge Field F1 General Help F10 Save and Exit ESC Exit V02.61 © Copyright 1985-2006 American Mega trends , Inc. Active State Power Management: [Disabled] [Enabled] 3.4.
3.4.10 USB Configuration BIOS SETUP UTILITY Advanced USB Configuration Enables support for Module Version – 2.24.3-13.4 legacy USB.ATUO option disables legacy support if no USB USB Devices Enabled : 1Keyboard devices are connected Legacy USB Support USB2.0 Controller Mode BIOS EHCI Hand-Off [Enabled] [Fullspeed] [Enabled] ← Select Screen ↑↓ Select Item +- Charge Field F1 General Help F10 Save and Exit ESC Exit V02.61 © Copyright 1985-2006 American Mega trends , Inc.
BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Advanced PCI/PnP Settings Clear NURAM during WARNING: Setting wrong values In below sections may cause system to malfunction. Clear NVRAM Exit System Boot.
[32] [96] [128] [160] [192] [224] [248] Allocate IRQ to PCI VGA: [Yes] [No] Palette Snooping: [Disabled] [Enabled] PCI IDE BusMaster: [Disabled] [Enabled] OffBoard PCI/ISA IDE Card: Some PCI IDE cards may require this to be set to the PCI slot number that is holding the card. Auto:Works for most PCI IDE Cards. [Auto] [PCI Slot1] [PCI Slot2] [PCI Slot3] [PCI Slot4] [PCI Slot5] [PCI Slot6] IRQ3/4/5/7/9/10/11/14/15: [Available] [Reserved] Available: Specified IRQ is available to be used by PCI/PnP devices.
Reserved: Specified DMA is reserved for use by legacy ISA devices. Reserved Memory Size: Size of memory block to reserve for legacy ISA devices. [Disabled] [16k] [32k] [64k] 3.6 Boot Settings BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Boot Settings Chipset Exit Configure Settings During System Boot ► Boot Setting Configuration ► Boot Device Priority ► Hard Disk Drives ← Select Screen ↑↓ Select Item Enter Go to sub screen F1 F10 ESC General Help Save and Exit Exit V02.
Quiet Boot: [Disabled] [Enabled] Disabled: Displays normal POST messages. Enabled: Displays OEM logo instead of POST messages. AddOn ROM Display Mode: Set display mode for Option ROM. [Force BIOS] [Keep Current] Bootup Num－Lock: Select Power-on state for Numlock. [On] [Off] Wait For ‘F1’ If Error: Wait for F1 key to be pressed if error occurs. [Enabled] [Disabled] Hit ‘DEL’Messgae Display : Displays “press” DEL to run Setup in POST.
3.7 Security Settings BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Security Settings Supervisor Password User Password Chipset Exit Install or Change the :Not Installed :Not Installed password. Change Supervisor Password Change User Password Boot Sector Virus Protection [Disabled] ← Select Screen ↑↓ Select Item Enter Charge F1 General Help F10 Save and Exit ESC Exit V02.61 © Copyright 1985-2006 American Mega trends , Inc.
clear all previously typed CMOS passwords. You will be requested to confirm the password. Type the password again and press Enter key. You may press Esc key to abandon password entry operation. To clear the password, just press Enter key when password input window pops up. A confirmation message will be shown on the screen as to whether the password will be disabled. You will have direct access to BIOS setup without typing any password after system reboot once the password is disabled.
Note: Due to limited address length of BIOS, only a portion of panel parameters are listed in BIOS Setup. If the connected panel is not included in the parameter list, display problem will occur. In this case, Please do not change BIOS setup. 3.8.
[PCI/IGD] [IGD] IGD Graphics Mode Select: [Enabled, 64MB] [Disabled] [Enabled, 32MB] [Enabled, 128MB] Video Function Configuration: BIOS SETUP UTILITY Chipset Video Function Configuration Options DVMT Mode Select Mode] [DVMT DVMT/FIXED [256MB] Memory Boot [VBIOS-Default] DVMT Mode Display Flat Panel Type 18bit 1c] Backlight [VBIOS-Default] Fixed Mode Device [1024x768 Control Support ← Select Screen ↑↓ Select Item Backlight Control Level [Level 8] +- Charge option Backlight Control Mo
[DVMT Mode] [FIXED Mode] DVMT/FIXED Memory Size: [256MB] [128MB] [Maximum DVMT] Boot Display Device: [VBIOS-Default] [CRT] [LVDS] [CRT + LVDS] Flat Panel Type: [1024x 768 18bit 1ch] [640x480 18bit 1ch] [800x480 18bit 1ch] [800x600 18bit 1ch] [1280x800 18bit 1ch] [1366x768 18bit 1ch] [1024x768 24bit 2ch] [1280x1024 24bit 2ch] [1440x900 24bit 2ch] [1600x900 24bit 2ch] [1680x1050 24bit 2ch] [1920x1080 24bit 2ch] Backlight Control Support [VBIOS-Default] [Both BLC & BIA Disabled] [BLC Enabled] Backlight Control
[Level6] [Level7] [Level9] [Level10] [Level11] [Level12] [Level13] [Level14] [Level15] Note: Panel support PWM Function. Backlight Control Mode: [DC] [PWM] Backlight Image Adaptation: [VBIOS-Default] [BIA Disabled] [BIA Enabled at Level1] [BIA Enabled at Level2] [BIA Enabled at Level3] [BIA Enabled at Level4] [BIA Enabled at Level5] 3.8.2 South Bridge Configuration: BIOS SETUP UTILITY Chipset South Bridge Chipset Configuration USB Functions Ports] USB2.
SLP_S4# Min. Assertion Width Seconds] Restore on AC Power loss [4 to 5 [Power off] PCIE Ports Configuration PCIE Port 0 PCIE Port 1 [Auto] [Auto] ← Select Screen ↑↓ Select Item PCIE Port 2 PCIE Port 3 PCIE Port 4 PCIE High Priority Port [Auto] [Auto] [Auto] [Disabled] +- Charge Field F1 General Help F10 ESC Save and Exit Exit V02.61 © Copyright 1985-2006 American Mega trends , Inc.
SLP_S4# Min.
[Port3] [Port4] [Port5] PCIE Port 0 IOxAPIC Enabled: PCIE Port 1 IOxAPIC Enabled: PCIE Port 2 IOxAPIC Enabled: PCIE Port3 IOxAPIC Enabled: PCIE Port4 IOxAPIC Enabled: PCIE Port5 IOxAPIC Enabled: [Disabled] [Enabled] 3.
(F10 key can be used for this operation) [OK] [Cancel] Discard Changes and Exit: Discard Changes and Exit setup? (ESC key can be used for this operation) [OK] [Cancel] Discard Changes: Discard changes? (F7 key can be used for this operation) [OK] [Cancel] Load Optimal Defaults: Load Optimal Defaults? (F9 key can be used for this operation) [OK] [Cancel] Load FailSafe Defaults: Load FailSafe Defaults? (F9 key can be used for this operation) [OK] [Cancel] ACS-2685 User Manual 66
Chapter 4 Installation of Drivers This chapter describes the installation procedures for software and drivers under the windows XP. The software and drivers are included with the motherboard. The contents include Intel chipset driver VGA driver LAN drivers Audio driver .NET framework 3.5 driver Installation instructions are given below.
4.1 Intel Chipset Driver To install the Intel chipset driver, please follow the steps below. Step 1: Select Chipset from the list Follow the step-by-step installation process to install the driver.
ACS-2685 User Manual 69
Click Finish, when the installation process is complete, the Setup Complete screen appears. See as picture.
4.2 Intel Graphics Media Accelerator driver To install the VGA drivers, follow the steps below to proceed with the installation. 1. Click Intel(R) GM45 Chipset Family Graphics Driver. Follow the step-by-step installation process to install the Graphics Media Accelerator driver.
ACS-2685 User Manual 72
ACS-2685 User Manual 73
Click FINISH; A Driver Installation Complete.
4.3 Intel 82574L LAN Device Driver To install the Intel R 82574L Gigabit LAN connect device driver, please follow the steps below. Select LAN from the list Follow the step-by-step installation process to install the LAN driver.
ACS-2685 User Manual 76
Click FINISH; A Driver Installation Complete.
4.4 Realtek ALC662 HD Audio Driver Installation To install the Realtek High Definition (HD) Audio driver, please follow the steps below. Select Audio from the list Follow the step-by-step installation process to install the Realtek HD Audio driver.
Click FINISH; A Driver Installation Complete.
4.5 Microsoft .NET Framework 3.5 Service Installation To install the Microsoft .NET Framework 3.5 Service, please follow the steps below.
ACS-2685 User Manual 81
ACS-2685 User Manual 82
