Manual
Table Of Contents
- The BOX Cover
- Table of Contents
- Important Safety Instructions
- 1.0 Overview
- 2.0 Input Channels 1-4
- 3.0 Summing Input Channels 1-16
- 4.0 Master Section
- 5.0 Stereo Program Master
- 6.0 527 Compressors
- 7.0 Auxiliary Masters
- 8.0 Cue Master
- 9.0 Talkback
- 10.0 Solo System
- 11.0 Monitoring Systems
- 12.0 VU Meters
- 13.0 Rear Panel Connections
- 14.0 Application Guide
- APPENDIX
- API “The BOX”
API “The BOX” Operator’s Manual
63
9.0 Talkback
“The BOX” is equipped with a complete talkback system for use when recording. The talkback
systems includes:
• Internal electret microphone
• Level control
• Momentary talk button
• Preset routing
Talkback can be routed to the following:
• SLATE: Program bus
• AUX: Auxiliary masters
• CUE: Cue master
The talkback signal flow is as follows:
⇒
⇒
⇒
SLATE
⇒
trim
⇒
program bus
⇑
Talkback mic
⇒
preamp
⇒
TALK button
⇒
routing
⇒
⇒
AUX
⇒
trim
⇒
aux masters
⇓
⇒
⇒
⇒
CUE
⇒
trim
⇒
cue master
9.1 Talkback Microphone and Trims
MICROPHONE: Internal talkback microphone
• Electret condenser mic
SLATE: Talkback to program bus calibration trim-pot
AUX: Talkback to auxiliary master calibration trim-pot
CUE: Talkback to cue master calibration trim-pot