Manual
Table Of Contents
- The BOX Cover
- Table of Contents
- Important Safety Instructions
- 1.0 Overview
- 2.0 Input Channels 1-4
- 3.0 Summing Input Channels 1-16
- 4.0 Master Section
- 5.0 Stereo Program Master
- 6.0 527 Compressors
- 7.0 Auxiliary Masters
- 8.0 Cue Master
- 9.0 Talkback
- 10.0 Solo System
- 11.0 Monitoring Systems
- 12.0 VU Meters
- 13.0 Rear Panel Connections
- 14.0 Application Guide
- APPENDIX
- API “The BOX”
API “The BOX” Operator’s Manual
38
3.4 Auxiliary Sends
Auxiliary/Cue Controls
3.4.1 Mono Aux Sends 1/2
AUX 1 and AUX 2 are mono auxiliary sends that feed aux buses 1 and 2. These sends
are commonly used as effects sends, but can be used for additional headphone feed or
other purposes.
A common on/off switch is used to silently engage both mono sends. The post-fader
signal feeds AUX 1/2 by default, but the pair can be switched to the pre-fader signal.
“The BOX” is equipped with four (4) auxiliary
sends fed by two (2) mono auxiliary sends
(1/2), and one (1) stereo auxiliary/cue send
(3/4).
Each pair of sends has pre/post-fader
routing and an on/off switch. The stereo aux
send (3/4) can be routed to feed the stereo
cue bus instead of aux buses 3 & 4.
To support these sends, “The BOX” is
equipped with four auxiliary buses, a stereo
cue bus, and corresponding masters with
balanced outputs.