Manual
Table Of Contents
- The BOX Cover
- Table of Contents
- Important Safety Instructions
- 1.0 Overview
- 2.0 Input Channels 1-4
- 3.0 Summing Input Channels 1-16
- 4.0 Master Section
- 5.0 Stereo Program Master
- 6.0 527 Compressors
- 7.0 Auxiliary Masters
- 8.0 Cue Master
- 9.0 Talkback
- 10.0 Solo System
- 11.0 Monitoring Systems
- 12.0 VU Meters
- 13.0 Rear Panel Connections
- 14.0 Application Guide
- APPENDIX
- API “The BOX”
API “The BOX” Operator’s Manual
20
The input channel MUTE and SOLO switches are located just above the fader.
NOTE: The SAFE switch is located below the pan-pot.
Refer to section 9.0 Solo Master for more information regarding the solo system.
MUTE: Cuts the channel output
• Located post-fader in the signal flow
• Illuminates in red when engaged
• Activates on release
SOLO: Activates the current solo function on that channel
• PFL, AFL, or solo-in-place (PFL is default)
• Can be cleared by pressing the SOLO CLEAR switch
• Illuminates in orange when engaged
SAFE (solo safe): Activates the solo-safe function on that channel
• SAFE prevents muting when Solo-In-Place is active and another
channel is soloed.
• Illuminates when engaged
INPUT FADER: Primary output level control
• 100mm full-size audio-taper fader
• -∞dB to +12dB range
• 0dB is unity gain
• Blue fader cap