Manual
Table Of Contents
- The BOX Cover
- Table of Contents
- Important Safety Instructions
- 1.0 Overview
- 2.0 Input Channels 1-4
- 3.0 Summing Input Channels 1-16
- 4.0 Master Section
- 5.0 Stereo Program Master
- 6.0 527 Compressors
- 7.0 Auxiliary Masters
- 8.0 Cue Master
- 9.0 Talkback
- 10.0 Solo System
- 11.0 Monitoring Systems
- 12.0 VU Meters
- 13.0 Rear Panel Connections
- 14.0 Application Guide
- APPENDIX
- API “The BOX”
API “The BOX” Operator’s Manual
18
2.2.5 Meter and Meter Routing
Input channels are equipped with an 8-segment LED full-scale meter. The meter
displays the post-fader output from the channel by default, but can be switched to
display the output of the preamp. A calibration trim-pot is provided so 0dBFS on the
meter matches 0dBFS in the connected DAW.
0dBFS: 8-segment LED full-scale meter
• Indicates post-fader, channel output level by default
• Indicates preamp output level when MTR PRE is engaged
METER (calibration): Meter calibration trim-pot
• Calibrates the meter to match 0dBFS on the DAW converter
MTR PRE (meter preamp): Replaces the output of the fader with the
output of the preamp as the meter source
• Default meter feed is post-fader, channel output if not engaged
• Illuminates when engaged