Service manual

SECTION 2 - PROCEDURES
2-40 – JLG Sizzor – 3120855
2.21 MACHINE PERSONALITY SETTINGS
Table 2-4. Machine Personality Settings
PERSONALITY MIN MAX
DRIVE-ACCEL 0.5 SEC 5.0 SEC
DRIVE-DECEL 0 SEC 5.0 SEC
DRIVE CREEP 1% 25.0%
DRIVE SPEED MAX (LOW) 50% 100%
DRIVE SPEED MAX (HIGH) 50% 100%
*ELEVATION MAX *0% *40%
*POSI-TRAC TIME *0 Sec *60 Sec
*HIGH DRIVE OVERCURRENT *50 Amp *200 Amp
HIGH DRIVE TIME OUT 0 Sec 25 Sec
LIFT ACCEL 0.5 Sec 5.0 Sec
LIFT DECEL 0.0 Sec 1.5 Sec
LIFT CREEP 1% 25%
LIFT UP MAX 50% 100%
MAX DOWN 30% 100%
DECK ACCEL 0.5 Sec 5.0 Sec
DECK DECEL 0 Sec 5 Sec
DECK CREEP 1% 25%
DECK EXT MAX 0100%
DECK RET MAX 0100%
STEER STATIC 20% 50%
STEER (DRIVE COMP) 035%
GROUND LIFT UP MAX 0% 100%
GROUND LIFT DOWN 0% 100%
GROUND DECK OUT 0% 100%
GROUND DECK IN 0% 100%
*JLG strongly recommends that these settings not be changed. Changing these settings
may adversely affect the performance of your machine.
NOTE: Personality settings can be adjusted within the adjustment range in order to achieve opti-
mum machine performance.